Samsung ac error code list
Displayed error codes | Cause | Solution |
|---|---|---|
CF | Filter cleaning reminder Filter reset indicator | Clean or replace the inner filters of the indoor unit |
Cl | Auto clean indicator (Indoor unit produces odors) | Operate the Auto clean function to remove the odors |
dF | Automatic Defrost function (During the Defrost function or steam is produced on the outdoor unit) | This is not a manufacturing defect (When the Heat mode is off, this function will be turned off.) |
4E (4C) | The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose. | Check the water hose Check the water supply Clean the water hose mesh filter Clean the dispenser drawer |
Error codes requiring authorized service
When the air conditioner displays the E1 code on the display panel and won't turn on, it means the room thermistor (a device connected to the thermostat that detects the room temperature) is shorted or defective. Most of these cases need to be handled by an authorized repair person. Therefore, please contact the nearest Samsung service center.
Displayed error codes | Cause | Solution |
|---|---|---|
E 1 or 21 | Defective of the room temperature sensor | Contact the authorized Samsung service center |
E 1 or 22 | Defective of the heat exchanger temperature sensor | Contact the authorized Samsung service center |
E1 or 54 | Defective of fan motor or capacitor | Contact the authorized Samsung service center |
E1 or 63 | Defective of the EEPROM | Contact the authorized Samsung service center |
E5 | -Short of indoor heat exchanger sensor | Check the exchanger sensor departure of the indoor unit (Sensor replacement may be needed) |
E6 | -Short of the outdoor heat exchanger sensor | Check the exchanger sensor departure of the outdoor unit (Sensor replacement may be needed) |
E7 | -Short of the heater temperature sensor | Check the heater temperature sensor departure (Sensor replacement may be needed) |
Note: If the indoor unit indicator blinks, write down the error code and contact your service provider. It is good to provide them with the error code.
Contact the Service Center for a physical assessment
If the air conditioner is still not working, it is recommended to have this checked by our Authorized Service Center. There are a number of different ways of contacting us should you need support.
Available daily from 8:00 AM - 8:00 PM
Call
PLDT Toll-Free: 1-800-10-726-7864
Globe Toll-Free: 1-800-8-726-7864
Standard Landline: (02)8-422-2111
Daily (8:00 AM to 8:00 PM)