All microwave error codes follow this process no matter which error code you get. However, if you're curious about what your error code means, see this list:
C-10, C-11, C-12 :
Error with gas/easy/PH sensor
C-20, C-21, C-22
Error with temp sensor
C-70, C-71, C-72
Error with steam sensor
C-A0, C-A1, C-A2
Functional error
C-d0, C-d1, C-d2
Door or Key error
C-F0, C-F1, C-F2
Communication error
E-01
Open error
E-02
Cooking time setting over error (microwave)
E-03
Cooking time setting over error (grill)
E-04
Cooking time setting over error (convection)
E-05
Cooking time setting over error (combination)
E-06
Swing heater error
E-11
Open gas sensor error
E-12
Short gas sensor error
E-13
T1 max time gas sensor error
E-14
Dry up / no load gas sensor error
E-21
Open temp sensor error
E-22
Short temp sensor error
E-23
T1 max time error
E-24
Over temperature error
E-25
Micro cook abnormal temperature error
E-26
Temperature not over AD error
E-31
Open gas sensor error
E-32
Short gas sensor error
E-33
Under weight error
E-34
Over weight error
E-35
Invalid weight error
E-36
Door open error
E-41
Open easy/PH sensor error
E-42
Short easy/PH sensor error
E-43
T1 max time easy/PH sensor error
E-44
Dry up easy/PH sensor error
E-45
Cooling error
E-46
Primary open error
E-47
Door open error
E-51
Sense failure
E-52
EEPROM short error
E-53
Read/write error
E-54
Zero error
E-61
Open humidity sensor error
E-62
Short humidity sensor error
E-63
T1 max time humidity sensor error
E-71
Steam sensor open error
E-72
Steam sensor short error
E-81
Communication open error
E-82
Communication short error
E-83
Communication error
E-X1
Additional open error
E-X2
Additional short error
-SE-
Key short error
TE
Touch communication error
Common Samsung Microwave Error Codes
SE / 5E / 5E1 / 5E2 - Sensor Error: This error code indicates a problem with the humidity sensor. It may occur due to a faulty sensor, a loose connection, or a buildup of food debris. The microwave's functionality might be affected when this error is displayed.
5C / 5C2 - Door Error: The door error code signifies an issue with the microwave door. It could be due to a misaligned door, a damaged door latch, or an obstruction preventing the door from closing properly.
1E / 1E1 / 1E2 - Inverter Error: An inverter error code suggests a problem with the microwave's power supply or inverter circuit. This issue might affect the cooking performance or cause the microwave to shut down.
5E5 / SE5 / SE 5E - Humidity Sensor Error: Similar to the SE error, this code indicates a malfunction in the humidity sensor or its connection.
E11 - Shorted Keypad or Control Panel: The E11 error implies a problem with the microwave's control panel or keypad. A short circuit or stuck key can trigger this error.
E13 - Control Board Communication Error: The E13 error code suggests a communication problem between the control board and other microwave components. It may require professional diagnosis and repair.
Troubleshooting and Solutions
1. Power Cycle the Microwave
If you encounter an error code on your Samsung microwave, start by performing a power cycle. Unplug the microwave from the power source and wait for a few minutes. Then, plug it back in and check if the error persists. Sometimes, a simple reset can resolve temporary issues.
2. Check the Door
For door-related error codes, inspect the microwave door for any obstructions or damage. Ensure that it closes securely and that the door latch is functioning correctly. Clean any dirt or residue around the door edges that might be affecting the closure.
3. Verify the Humidity Sensor
If the error indicates a humidity sensor problem, unplug the microwave and carefully remove the sensor cover (if accessible). Clean the sensor with a soft, dry cloth, and ensure it is securely connected. If the issue persists, the sensor may need replacement, and you should seek professional service.
4. Address Keypad Issues
For errors related to the control panel or keypad, carefully check for any stuck or damaged keys. Gently clean the keypad surface with a soft, dry cloth. If the issue continues, the control panel may need replacement or repair.
5. Seek Professional Service
If the error code remains unresolved after attempting the troubleshooting steps above, it's best to contact Samsung's customer support or a certified service technician. They have the expertise to diagnose and fix more complex internal issues with the microwave.