TCL Induction Cooker Error Code List With Solution
| Error Code | Solution | |
| E0 | Ensure the pot or pan is placed correctly | |
| E1 | The circuit has malfunctioned | |
| E2 | The temperature sensor is an opening circuit or short circuit | |
| E3 | The voltage is higher (140V-160V)for 3 seconds | |
| E4 | The voltage is lower (80V-100V) for 3 seconds. | |
| E5 | The cook-top surface temperature is too high | |
| E6 | Internal Electronic Temperature is higher than normal for 3 seconds | |
| E7 | An internal Electronic Temperature sensor is an opening circuit or short circuit |
here is a list of TCL induction cooker error codes and their solutions:
| Error Code | Solution |
|---|---|
| E1 | The hob is not turned on. Turn on the hob and try again. |
| E2 | The hob is not connected to the power supply. Make sure that the hob is connected to a power outlet and that the power is turned on. |
| E3 | The hob is not level. Make sure that the hob is level on a flat surface. |
| E4 | The hob is not properly installed. Make sure that the hob is properly installed according to the instructions in the user manual. |
| E5 | The hob is not properly cleaned. Clean the hob with a mild detergent and a soft cloth. |
| E6 | The hob has detected a fault with the induction coil. Turn off the hob and contact TCL customer service for assistance. |
| E7 | The hob has detected a fault with the control system. Turn off the hob and contact TCL customer service for assistance. |
| E8 | The hob has detected a fault with the temperature sensor. Turn off the hob and contact TCL customer service for assistance. |
| E9 | The hob has detected a fault with the power supply. Turn off the hob and contact TCL customer service for assistance. |
If you are still having trouble after trying these solutions, you may need to contact a qualified electrician or TCL customer service for assistance.
Here are some additional tips for troubleshooting TCL induction cooker errors:
- If the error code appears immediately after turning on the hob, it may be a problem with the power supply. Try unplugging the hob for a few minutes and then plugging it back in.
- If the error code appears while you are cooking, it may be a problem with the cookware. Make sure that you are using cookware that is compatible with induction cooking.
- If you have tried all of the troubleshooting steps and you are still having problems, you may need to have the hob serviced.
Here are some safety tips for using a TCL induction cooker:
- Do not use the hob if it is damaged.
- Do not use the hob if there is any liquid or food on the surface.
- Do not use the hob if the power cord is damaged.
- Do not use the hob if the hob is not level.
- Do not use the hob if the hob is not properly installed.
- Do not use the hob if the hob is not properly cleaned.
By following these safety tips, you can help to prevent accidents and keep your TCL induction cooker in good working order.