Whirlpool washers feature error code systems to help identify and troubleshoot issues with the machine. Here is a list of common Whirlpool washer error codes and their meanings:
F/H - This error code stands for "No Water Entering" and indicates that the washer is not detecting water flow into the machine within a specific time frame. Check that the water supply is turned on, the inlet hoses are not blocked or kinked, and the water inlet valves are functioning properly.
F/dL or F/dU - The F/dL or F/dU error code indicates a door lock problem. It means that the washer is having trouble locking or unlocking the door. Check for obstructions around the door, ensure it is closed securely, and inspect the door lock mechanism for any damage or issues.
F/02 or SUD - These error codes indicate a draining issue. F/02 stands for "Long Drain," suggesting that the washer is taking too long to drain the water. SUD stands for "Excessive Suds" and occurs when there is an excess of suds in the washer. Check for clogs in the drain hose, ensure the drain pump is working correctly, and confirm that the drain hose is not kinked or obstructed.
F/05 - The F/05 error code indicates a water temperature sensor issue. It means that the washer is not detecting the correct water temperature. Verify that the hot and cold water supply valves are fully open and that the water inlet hoses are connected properly.
F/06 - This error code indicates a drive motor tachometer error. It suggests a problem with the drive motor or motor control unit. Try resetting the washer by unplugging it for a few minutes and then plugging it back in. If the error persists, professional assistance may be required to diagnose and repair the motor or control unit.
F/09 - The F/09 error code suggests a problem with the overflow condition. It occurs when too much water has entered the washer or if the drain pump is not functioning correctly. Check for any clogs in the drain system and ensure that the drain pump is working properly.
F/21 - This error code stands for "Long Drain" and indicates that the washer is taking too long to drain the water. Check for clogs in the drain hose, ensure the drain pump is working correctly, and confirm that the drain hose is not kinked or obstructed.
F/22 - The F/22 error code indicates a door lock failure. It means that the washer is having trouble locking the door. Check for any obstructions around the door, ensure it is closed securely, and inspect the door lock mechanism for any damage or issues.
These are some of the common error codes found in Whirlpool washers. If you encounter an error code not listed here or if the issue persists after troubleshooting, consult the washer's user manual or contact Whirlpool customer support for further assistance. They can provide specific guidance based on your washer model and the error code displayed.